HiMedia HD300C/HD300D HD Media Player Firmware Upgrading Instructions：

Download the latest firmware from our official portal website: http://www.playsmartsg.biz/supportdownload.htm
1) Power Off Your Player and Reboot (Recommended! Reboot before firmware upgrading)

2) De-compress the downloaded firmware file (in RAR format), then rename it to install.img

3) Copy install.img to the root directory of your USB HDD or Thumbdrive and plug it into the USB port of your Player,

4)Power on,Press “Setup” button on your remote control, enter “Setup” Page, Go to “System”, Select “System Upgrade”,

5) Press “Enter”, After 3 to 5 seconds, Firmware Upgrading Starts and you will see the Firmware Upgrading Progress on your TV Screen.

6) It takes about 2 minutes to finish.

In case firmware upgrading failed due to power cut off, you can use “Super Firmware Upgrading Mode” to force your player
to upgrade firmware again.

How to enter “Super Firmware Upgrading Mode”?

Repeat the Step 1,2,3,

4)Then Press “PREV” and “NEXT” buttons on your player front panel at same time

5)Power On your Player (After 5 seconds, release these two buttons (PREV and NEXT) on your player front panel)

6)After few seconds, you will see firmware upgrading screen AGAIN! LOL, your HiMedia Player will never Die!

Cheers

Still have problems? Call Play Smart Customer Service Hotline: 6338 3442 or 9357 8432

or email: playsmartsg@gmail.com

or MSN: playsmartsg@hotmail.com

 or discuss it in our forum: http://www.playsmartsg.net

 

1） 关机重启 （推荐用户，升级前先重启一次）

2） 解压下载文件，重新命名为install.img

3) 拷贝到u盘根目录，开机，进入设置页面， 在系统栏， 找到系统升级

4） 按确认后，过3~5秒会开始升级，进入升级页面

5） 大概持续2分钟左右，升级完成；
本版本旨在提高稳定性， 更多新功能在1.0.1.x固件发布；

当播放器在正常升级失败情况下（如升级过程中断电），可以通过该模式来重新升级播放器，
升级步骤如下：

1.将最新固件命名为install.img，并拷贝到U盘根目录下，接在主机USB口上（前后都可以任选）。
2.请同时按住机器前面板上的”NEXT”键和”PREV”键。
3.上电开机(上电5秒后松开以上两个键）
4.不出问题的话，几秒后出现升级页面（什么你又断电了？那从第二项开始重做吧）